Reviews

Product Reviews

Fence for Life – Concrete Fencing Review

Reviews /
fence for life concrete fence review

Concrete Fencing – Product Review At our previous house we had a wood fence that despite being stained every couple years was noticeably weathered. I had to replace two posts, repair the gate a couple times (mostly from sagging issues), and also straighten multiple posts that began to lean.  I remember when we had the house built and a fence was including the build.  The building inspector mentioned that the fence would probably last 5 years or so, we managed to double that. However, if I had to guess, it probably didn’t have too much longer to go. Our Needs for a Fence Keeping Our Dog Contained Needing to keep our dog from running off, we were looking to have a fence installed when we moved.  I was looking for something would be long lasting and very limited on maintenance.  Atop the wish list was something that would not rot, rust, and would not need tons of maintenance.  Cost was also a major factor. I was also concerned about the durability of plastic fences that were available, both structurally and against UV discoloration. Low Maintenance, Long Lasting While I was searching for options, I came across Fence for Life who serves Western Washington.  They mentioned the downside to metal or wood fences on their website and the advantages their fences offered with the motto “do it once for life”.  Their fences are pre-casted from a reinforced concrete with several different styles and height options available, even the posts are made from concrete that is reinforced with rebar. Posts are often times the first failure of traditional wood post fencing.  Therefor, seeing they offered concrete posts certainly was intriguing.  These fences are advertised as maintenance free and are supposed to withstand 85mph winds, but you may need to give them a pressure wash every couple years.  My only real concern at this point is if the ground gets too wet and if that causes the posts to lean.  The posts are 2-3 feet in the ground, so hopefully everything holds up. Installing a Concrete Fence While Fence for Life does sell the panels and posts for owner-installation, this wasn’t a project I had any desire to take on. We had zero hesitation having them do the installation. Just two crew members, they were able to install the entire fence in just 3 days. They showed up with their flat bed truck and just enough posts and panels to keep them busy for the entire day. On day 2, they arrived with another batch of panels and posts. For day 3, it was a small remaining batch and they finished up in the early afternoon. Some photos of our concrete fencing installation: The inward facing side of the fence panels do not have a decorative pattern like the outward facing, rather they are just flat.  Having the pattern on both sides would certainly have improved the overall aesthetics, but it is what it is. I imagine other companies may have their fences patterned on both sides. This view shows how the 3.5 panels were stacked and slid inside the post slots. Installing a Concrete Fence On a Slope (or Any Fence) Our backyard gradually slopes down and major excavation was never a consideration, so the majority of our concrete fencing gradually descends in a bit of a staggered manner. Bringing in an insane amount of fill really wasn’t an option. How Much Does Concrete Fencing Cost? When we first purchased our fencing, the price was surprisingly comparable to traditional cedar wood picket fencing. If we went with a cedar fencing and decided to stain it ourselves, the cost likely would have been greater than the precast concrete fence. Inflation has definitely caused prices to go up for several materials including lumber and concrete. It’s best to check current pricing in your area. Concrete fence pricing will certainly vary by location as well, but I would recommend getting a couple of quotes for more traditional fencing to do a direct comparison for your area and exact needs. Concrete Fence Review Updates Quick April 2020 Update – Living in Western Washington we get a lot of green algae build up outside.  I thought for sure we’d experience this on our fence, especially on the north side, but no signs yet! August 2023 Update: We do have some discoloration and some of the green algae finally starting to appear on some northern facing sections. The dark discolorations seem to be mostly at the top. I’ll have to get the pressure washer out and see how it handles the darker areas and the algae, but other than that, no issues whatsoever. Summary We’ve had ours installed since just May 2015 now, so far so good.  Certainly pleased with how everything has held up and so far as been completely maintenance free. I’ll probably have to do some pressure washing at least on some of the north facing panels. Check out the custom pedestrian gate I built: https://fabville.com/custom-diy-steel-gates-the-52%e2%80%b3-four-foot-gate

Geaber Snap Ring Pliers Review

Tools /

Snap ring pliers are an essential tool for anyone working in the field of mechanics, automotive engineering, or industrial manufacturing. They are used to install and remove snap rings, which are small rings that hold components in place. Snap ring pliers come in different shapes and sizes to accommodate different types of snap rings. One of the most popular snap ring pliers on the market is the Geaber snap ring pliers. In this review, we will take a closer look at the features, performance, and overall quality of the Geaber snap ring pliers. Geaber Snap Ring Plier Features: The Geaber snap ring pliers are designed for heavy-duty use, with a durable construction that can withstand the demands of a busy workshop. They are made from high-quality materials, including chrome-vanadium steel, which is known for its strength and durability. This set is a heavy duty, 4-piece set of 7-inch internal and external pliers. It includes straight and 90 degree bent pliers that are spring loaded for an open and closed version of both the straight and bent versions. The pliers have a comfortable grip, with ergonomic handles that are easy to hold and provide a good grip. The handles are also coated with a non-slip material, which helps to prevent them from slipping out of your hands. This set also comes with a carrying case. I’ll likely hang my set on a pegboard though. You can read my article on Who Makes the Best Pegboards. Performance: The Geaber snap ring pliers are designed to provide reliable performance, and they do not disappoint in this regard. These pliers are also designed to provide a good amount of leverage, which makes it easier to install and remove snap rings. The tips are precision-machined to ensure a tight fit, which helps to prevent the snap ring from slipping out of place. One of the areas where the Geaber snap ring pliers excel is in their versatility. They can be used to install and remove snap rings in a wide variety of applications, from automotive engines to industrial machinery. This makes them a useful tool for anyone working in the field of mechanics or industrial manufacturing. Overall Quality When it comes to the overall quality of the Geaber snap ring pliers, there is little to complain about. They are well-made, with a sturdy construction that can stand up to heavy use. The handles are also well-designed, with an ergonomic shape that is comfortable to hold for extended periods of time. The non-slip coating on the handles is a nice touch, as it helps to prevent the pliers from slipping out of your hands during use. Conclusion If you are in the market for a reliable set of snap ring pliers, the Geaber snap ring pliers are definitely worth considering. They are well-made, versatile, and provide reliable performance in a wide variety of applications. Their ergonomic handles make them comfortable to use for extended periods of time. Overall, the Geaber snap ring pliers are a solid choice for anyone looking for a high-quality set of snap ring pliers.

What Are the Best Pressure Washer Hose Replacements

Reviews, Tools /
what are the best pressure washer replacement hoses

Pressure washers are essential tools for cleaning everything from cars to driveways to patios. However, the hose that comes with your pressure washer can wear out over time, which can lead to decreased performance or even a complete failure of your machine. In this article, we’ll explore some of the best hose replacements for pressure washers on the market. The Flexzilla pressure washer hose is a top-of-the-line option for those looking to replace their worn-out hose. This hose is made with a unique hybrid polymer material that is kink-resistant, abrasion-resistant, and can handle temperatures up to 140°F. The Flexzilla hose is also lightweight and flexible, making it easy to maneuver around your workspace. The Sun Joe SPX-25HD is another excellent choice for a pressure washer hose replacement. This hose is designed to work specifically with Sun Joe pressure washers, but it can also work with other models. The SPX-25HD is made with a high-tensile steel wire braid that provides extra durability and support, and it can handle up to 2900 PSI of pressure. The Karcher 25-Foot Replacement Hose is made with a durable thermoplastic material that can handle up to 3600 PSI of pressure. The Apache 10085591 Pressure Washer Hose is a heavy-duty option for those who need a hose that can handle tough jobs. This hose is made with a thermoplastic cover that is oil-resistant, abrasion-resistant, and can handle temperatures up to 275°F. The Apache hose can handle up to 3100 PSI of pressure and is compatible with most pressure washer models. The Briggs & Stratton 6188 Replacement Hose is designed to work specifically with Briggs & Stratton pressure washers, but it can also work with other models. This hose is made with a heavy-duty, steel-braided construction that can handle up to 4000 PSI of pressure. The Briggs & Stratton hose also comes with a quick-connect system that makes it easy to attach and detach from your pressure washer. Summary In conclusion, there are many options available for replacing your pressure washer hose, and choosing the right one can be challenging. However, by considering factors such as durability, flexibility, and compatibility with your pressure washer model, you can find the best hose replacement for your needs. The Flexzilla, Sun Joe SPX-25HD, Karcher 25-Foot Replacement Hose & Trigger Gun Set, Apache 10085591 Pressure Washer Hose, and Briggs & Stratton 6188 Replacement Hose are all excellent options that offer high performance and durability.

SylvanSport GoZeebo Review

Reviews /
gozeebo screen room review

The SylvanSport Gozeebo is a versatile and innovative pop-up tent. It’s considered a 3-in-1 tent, screen room, and sunshade. With an optional awning, it can also be connected to the SylvanSport Go camping trailer. In this review, we will take a closer look at the Gozeebo and discuss its features, design, and performance. Design The Gozeebo is designed to be both lightweight and easy to set up. It is made from high-quality materials, including a durable aluminum frame and waterproof ripstop nylon fabric. The tent also features mesh windows and doors for ventilation, as well as a built-in rainfly to keep you dry during wet weather. The tent weighs in at 33lbs. One of the standout features of the Gozeebo is its innovative design. The tent is designed to be modular, meaning that it can be customized to meet your specific needs. Multiple GoZeebo’s can be attached to each other with an awning or, as previously mentioned, to a SylvanSport Go camping trailer. The Gozeebo also features a unique pop-up design that allows you to set up the tent in just minutes. Simply unfold the tent, attach the poles, and you’re ready to go. The tent also comes with a carrying bag for easy transport and storage. Features In addition to its innovative design, the Gozeebo is loaded with features that make it a great choice for camping and outdoor activities. Some of the standout features of the tent include: Performance When it comes to performance, the Gozeebo does not disappoint. The tent is designed to be both sturdy and comfortable, making it a great choice for camping and other outdoor activities. In terms of comfort, the Gozeebo is designed to be spacious and well-ventilated. The mesh windows and doors allow for plenty of airflow, while the built-in rainfly keeps you dry during wet weather. The tent is also designed to be durable and long-lasting, making it a great investment for outdoor enthusiasts. Pros Cons Conclusion The SylvanSport Gozeebo is a versatile and innovative pop-up tent that is well-suited for a wide range of outdoor activities. Its modular design, lightweight construction, and spacious interior make it a great choice for camping, hiking, and other outdoor adventures. One of the standout features of the Gozeebo is its modular design. This allows you to customize the tent to meet your specific needs. The optional vestibule and screen room attachments provide additional storage and living space, making it perfect for longer camping trips or for those who want a bit more room to spread out. The modular design also allows for easy customization and upgrading, making the Gozeebo a great investment for those who are serious about outdoor activities. In terms of interior space, the Gozeebo offers plenty of room for sleeping and relaxing. The mesh windows and doors provide excellent ventilation, keeping you cool and comfortable even on hot summer days. The built-in rainfly offers protection from wet weather, ensuring that you stay dry and comfortable no matter the conditions. Despite its many features, the Gozeebo does have a few drawbacks. It is more expensive than some other pop-up tents on the market, which may be a concern for budget-conscious campers. Additionally, a single color option may not appeal to those who prefer more customization options. Our Go camping trailer is blue, and even though they no longer offer the trailers in blue, it would have been nice to have the GoZeebo to match. Overall, the SylvanSport Gozeebo is a well-designed and versatile pop-up tent that offers excellent performance for a wide range of outdoor activities. Its modular design, lightweight construction, and spacious interior make it a great choice for camping, hiking, and other outdoor adventures. Despite its price point, the Gozeebo is a solid investment for those who are serious about their outdoor activities and want a tent that can keep up with their adventures.

Dewalt Miter Saw Review

Reviews, Tools /
dewalt double-bevel miter saw

The Dewalt Double Bevel Miter Saw is a powerful and versatile tool that is ideal for both professional contractors and DIY enthusiasts. I bought my first one over 10 years ago and purchased a second to keep at our cabin shortly after buying the property. One of the key features of this saw is its double bevel capability, which allows for quick and easy cuts at virtually any angle without the need for frequent adjustments. The saw’s bevel range goes up to 49 degrees to the left and right, providing maximum flexibility when working with angled cuts. The saw also comes equipped with a powerful 15-amp motor that delivers smooth and accurate cuts through a variety of materials, including wood, plastic, and metal. The blade’s speed reaches up to 3,800 RPM, making it one of the fastest saws in its class. Dewalt Miter Saw Adjustability The saw’s accuracy is further enhanced by its precise miter system, which features an adjustable stainless-steel miter detent plate with 11 positive stops that ensure accurate cuts every time. The saw’s oversized bevel scale also provides easy-to-read markings and helps to ensure accuracy when making bevel cuts. Another great feature of the Dewalt Double Bevel Miter Saw is its rugged construction. The saw is built to withstand heavy use and features a sturdy base that provides stability and reduces vibration. The saw’s dual horizontal steel rails with innovative clamping mechanism also deliver maximum accuracy and support when making angled cuts. Overall, the Dewalt Double Bevel Miter Saw is an exceptional tool that delivers accuracy, speed, and versatility in a durable package. While it is a bit pricier than some other saws on the market, its quality and performance make it well worth the investment. Dewalt Miter Saw Safety Features The saw also includes a variety of safety features, including an electric brake that stops the blade quickly once the trigger is released. This safety feature helps to prevent accidents and injuries in the workplace. One thing to keep in mind is that the saw is relatively heavy, which can make it difficult to move around, especially for those who work on different job sites. However, this weight is necessary for the saw’s stability and accuracy, so it’s a trade-off that most users are willing to make if you want to move it around. Ideally, a portable miter saw stand is best if you want frequent mobility with your saw. I went with a Dewalt miter saw stand for my original miter, but tried to save some money with the Rigid miter saw stand for my second. Watch for a new article on it later. Overall, the Dewalt Double Bevel Miter Saw is a top-performing saw that provides exceptional accuracy, power, and versatility. Its durable construction and safety features make it a great investment for professionals who need a reliable tool that can handle heavy use. While it may be a bit more expensive than other saws on the market, its performance and features make it a worthwhile investment for anyone who needs a high-quality miter saw.

Goal Zero Yeti 1000 Review

Tools /
goal zero yeti 1000 review

As our dependence on electronic devices continues to grow, portable power solutions are becoming increasingly important. The Goal Zero Yeti 1000 is a high-capacity portable power station designed to provide power for a wide range of devices, from small electronics like phones and tablets to larger devices like laptops and even some home appliances. In this review, we will examine the features of the Goal Zero Yeti 1000, including its limitations around amperage draw and the industry cycle charge, which may make you want to pass on this brand and look at some of their competitors. Features The Goal Zero Yeti 1000 is a portable power station that can be recharged in a number of ways, including solar panels, AC power, and 12V car charging. It has a lithium-ion battery with a capacity of 1045Wh (or 96,800mAh at 10.8V). This is enough to power a laptop for up to 12 hours, a mini fridge for up to 17 hours, and a TV for up to 10 hours, depending on the device and the load. The Yeti 1000 has a number of ports for charging and powering devices, including: This variety of ports makes it easy to charge and power a wide range of devices, from phones and tablets to larger appliances and power tools. The Yeti 1000 also has a built-in MPPT charge controller, which allows it to be charged more efficiently from solar panels. Limitations While the Goal Zero Yeti 1000 is a powerful and versatile portable power station, it does have some limitations that should be considered before purchasing. One limitation is the amperage draw of the AC outlets. While the Yeti 1000 can provide a surge of up to 1200W to power devices like mini fridges and power tools, the maximum continuous output from the AC outlets is 1000W. This means that if you are using the AC outlets to power devices that draw more than 1000W, the Yeti 1000 may not be able to keep up with the demand. While the Yeti 1000 might be able to handle the draw of some smaller miter saws, it will trip immediately for larger ones such as the Dewalt double-bevel miter saws. Another limitation of the Yeti 1000 is its cycle charge. The cycle charge is the number of times the battery can be fully charged and discharged before it starts to lose capacity. The Yeti 1000 has a cycle charge of around 500, which is lower than some of its competitors. This means that if you are using the Yeti 1000 frequently and fully discharging the battery, it may start to lose capacity after a few years of use. Competitors While the Goal Zero Yeti 1000 is a solid portable power station, there are a number of competitors on the market that may offer better value for your needs. One competitor is the Jackery Explorer 1000, which has a slightly lower capacity than the Yeti 1000 (1002Wh), but has a higher continuous output from the AC outlets (1000W). The Explorer 1000 also has a higher cycle charge of around 1000, which means it may last longer with frequent use. Another competitor is the EcoFlow Delta 1300, which has a higher capacity than the Yeti 1000 (1260Wh), a higher continuous output from the AC outlets (1800W), and a higher cycle charge of around 800. The Delta 1300 also has a unique feature called X-Boost, which allows it to provide up to 1800W of continuous power to devices that require a higher surge than their continuous output. This makes the Delta 1300 a good option for powering appliances like refrigerators and power tools. Conclusion The Goal Zero Yeti 1000 is a powerful and versatile portable power station that can provide power for a wide range of devices. Its variety of ports and recharge options make it easy to use, and its built-in MPPT charge controller allows it to be charged more efficiently from solar panels. However, the Yeti 1000 does have some limitations around amperage draw and cycle charge that should be considered before purchasing. If you are looking for a portable power station with a higher continuous output from the AC outlets and a higher cycle charge, the Jackery Explorer 1000 or the EcoFlow Delta 1300 may be better options. The Delta 1300 also has the added benefit of the X-Boost feature, which can provide extra power to devices that require a higher surge than their continuous output. Ultimately, the choice of which portable power station to purchase will depend on your individual needs and priorities. If you value the Goal Zero brand and the Yeti 1000’s features fit your needs, it can still be a solid choice. However, it’s important to consider all of your options before making a decision to ensure that you get the best value for your money.

EGO PowerStation Review

Reviews, Sustainability, The Workshop, Tools /

The EGO Power Station is a portable power source that allows you to charge your electronic devices on the go. This product is designed to be used outdoors, providing power to those who need it while camping, tailgating, or working on a job site. The EGO Power Station is powered by a 56-volt battery, which can be charged using a standard wall outlet or a solar panel. In this review, we will take a closer look at the EGO Power Station and see how it performs in real-world situations. Design and Build Quality The EGO Power Station has a sleek and compact design that makes it easy to carry around. It weighs only 21 pounds, which is relatively lightweight compared to other portable power stations on the market when the batteries are removed. The build quality is also impressive, with a sturdy plastic casing that feels durable and reliable. The top of the unit has a built-in handle, making it easy to carry from place to place. One thing that sets the EGO Power Station apart from other portable power stations is its weather-resistant design. It has an IP56 rating, which means it is protected against dust and water ingress. This makes it ideal for outdoor use, where it may be exposed to the elements. The power station is also designed to operate in extreme temperatures, from -4°F to 122°F. Charging and Output The EGO Power Station is powered by 56-volt batteries, which can be charged using a standard wall outlet or a solar panel. It takes about 10 hours to fully charge the battery using a wall outlet, which is relatively fast for a power station of this size. If you’re using a solar panel, the charging time will depend on the size and efficiency of the panel. The EGO Power Station has several output ports, including two USB-A ports, two USB-C ports, and two 120-volt AC outlets. This makes it easy to charge a variety of electronic devices, including smartphones, tablets, laptops, and power tools. The USB-A ports are rated at 2.4 amps each, while the USB-C ports are rated at 3 amps each. The AC outlets can provide up to 300 watts of continuous power, with a peak power output of 600 watts. Performance In terms of performance, the EGO Power Station delivers impressive results. We tested the unit by charging a variety of devices, including smartphones, tablets, and laptops. The power station was able to charge these devices quickly and efficiently, with no noticeable lag or delay. We also tested the power station with a power tool, and it was able to provide enough power to run the tool for several minutes. The EGO Power Station has a built-in display that shows the remaining battery life, as well as the output wattage and voltage. This is a useful feature that allows you to keep track of how much power you have left and how much power your devices are drawing. One thing to note is that the EGO Power Station can be a bit noisy when it’s operating at full power. This is to be expected with any portable power station, but it’s worth keeping in mind if you plan to use the unit in a quiet environment. Price and Value The EGO Power Station is priced at around $600 without batteries, which is relatively expensive compared to other portable power stations on the market. However, we believe that the price is justified given the quality and performance of the unit. The weather-resistant design, fast charging time, and multiple output ports make it a versatile and reliable power source for outdoor enthusiasts and professionals alike. Batteries While the EGO Power Station can be purchased with batteries, I went with the “tool only” station without batteries. For me, the EGO Power Station was a great way to repurpose the batteries from my EGO Zero Turn Mower. For faster charging of the batteries, I simply drop them into the mower for charging with the fast charger it came with. During power outages, we’ve used it to temporarily power our refrigeration, charge our cell phones, power our Starlink internet service, and power laptops. It’s allowed me to continue working at the house with internet despite no power. We had heavier and more frequently windstorms this past winter and went without for 3 or 4 days at one point. Plugging this into our fridge kept the temperature from rising too far and risking food going bad. Conclusion Overall, we were impressed with the EGO Power Station. It has a sleek and durable design, fast charging time, and multiple output ports that make it easy to charge a variety of devices. The weather-resistant design. is also a standout feature, making it a great choice for outdoor use. While it may be a bit noisy at full power, this is a minor drawback compared to the overall performance and quality of the unit. Another great feature of the EGO Power Station is its compatibility with other EGO Power+ products. This means that if you already own an EGO Power+ tool, such as a chainsaw or leaf blower, you can use the same battery to power your EGO Power Station. This is a convenient feature that adds value to the product. In terms of its price, the EGO Power Station may be on the higher end of the spectrum for portable power stations. However, when you consider the quality and performance of the unit, it’s well worth the investment. The EGO Power Station is a reliable and versatile power source that can be used in a variety of outdoor settings. In conclusion, the EGO Power Station is a high-quality and reliable portable power source that delivers impressive performance. Its weather-resistant design, fast charging time, and multiple output ports make it a great choice for outdoor enthusiasts and professionals who need reliable power on the go. While it may be a bit expensive compared to other portable power stations, the quality and performance

Vintage-Style Arcade Sign

Reviews /
light up retro arcade sign led

I was looking for a retro-style arcade sign for the game loft at our cabin and ended up with this one from Amazon by American Art Decor. The arcade games vintage inspired double-sided marquee LED sign is a unique and stylish way to add some retro flair to your home or business. This sign is inspired by the classic arcade games of the 1980’s and features a double-sided marquee design with bright LED lights that make it easy to see from a distance. In this review, we will take a closer look at the features and design of this arcade sign. Features The arcade games vintage inspired double-sided marquee LED sign is designed to be a stylish and functional addition to any space. It measures 25.5 inches in length, 8 inches in height, and 4.5 inches in depth. The sign features a fairly thin gauge metal frame, but should be for simply hanging up for display. With the double-sided design, it can be viewed from both the front and back, making it an ideal choice for hanging in a location where it will be visible from multiple angles. The LED lights used in this arcade sign are bright and eye-catching, making it easy to see from a distance. The lights are also energy-efficient, so the two double-a batteries (not included) should last quite a while. Design The sign is inspired by the classic arcade games of the 1980s and features a retro aesthetic that is sure to appeal to fans of that era. It’s lightweight and easy to hang, with pre-drilled holes that make it simple to attach to a wall or other surface. Hardware is not included, so make sure you have a couple of screws you can use to mount it. Conclusion Overall, the arcade games vintage inspired double-sided marquee LED sign is a unique and stylish addition to any space, especially for a game room. The sign’s retro aesthetic and bright LED lights make it easy to see from a distance. The sign is well-constructed and easy to install, with pre-drilled holes that make it simple to attach to a wall or other surface. Its lightweight design also makes it easy to move and use in multiple locations. The arcade games vintage inspired double-sided marquee LED sign is a great choice for anyone who wants to add some retro flair to their home or business. It is particularly well-suited for use in game rooms, man caves, and other spaces where a retro aesthetic is desired. Overall, the arcade games vintage inspired double-sided marquee LED sign is a well-designed and well-constructed sign that is sure to appeal to fans of the classic arcade games of the 1980’s. If you are looking for a unique and eye-catching sign to add to your home or business, this sign is definitely worth considering.

Best Flush Cut Trim Hand Saw

Tools /

The Suizan Japanese Flush Cut Trim Hand Saw is a highly regarded tool among woodworkers and DIY enthusiasts. With its precision and ease of use, it has gained a reputation as one of the best hand saws available on the market today. In this review, we will take a closer look at this tool and examine its key features, benefits, and drawbacks. While some flush cut saws only cut when you “pull”, this one allows both push and pull motion. First and foremost, the Suizan Japanese Flush Cut Trim Hand Saw is known for its precision. The saw’s blade is incredibly sharp and can cut through even the toughest materials with ease. This is due to the high-quality steel that the blade is made of, which is durable and long-lasting. The saw’s teeth are also designed to cut on the pull stroke, which allows for greater control and accuracy. Additionally, the saw’s teeth are impulse-hardened, which means that they are heat-treated to make them even stronger and more resistant to wear and tear. One of the most unique features of the Suizan Japanese Flush Cut Trim Hand Saw is its flush cut design. This means that the saw’s teeth are set in such a way that they do not protrude beyond the blade. This allows the saw to cut very close to the surface without damaging it, making it ideal for trimming and finishing work. This is particularly useful when working with delicate or expensive materials, as it ensures that you can cut precisely without damaging your workpiece. Another benefit of the flush cut design is that it allows for more versatility in the types of cuts that can be made. Traditional saws often struggle with making cuts close to a surface, but the Suizan Japanese Flush Cut Trim Hand Saw excels in this area. It can be used for a wide variety of cutting tasks, from trimming dowels and plugs to cutting tenons and dovetails. This makes it a versatile tool that can be used for a range of woodworking projects. In addition to its precision and versatility, the Suizan Japanese Flush Cut Trim Hand Saw is also very comfortable to use. The saw’s handle is made of high-quality materials and is ergonomically designed to fit comfortably in your hand. This makes it easy to use for extended periods without experiencing fatigue or discomfort. Additionally, the saw’s blade is thin and flexible, which allows for greater control and maneuverability. This is particularly useful when making delicate cuts or working in tight spaces. Overall, there are very few drawbacks to the Suizan Japanese Flush Cut Trim Hand Saw. One of the only potential downsides is that it may not be suitable for larger cutting tasks. This is because the saw’s blade is relatively short, measuring in at just 6.5 inches. While this makes it ideal for precise trimming work, it may not be the best choice for cutting larger pieces of lumber or making long, straight cuts. However, for the tasks it is designed for, the Suizan Japanese Flush Cut Trim Hand Saw is hard to beat. In terms of pricing, the Suizan Japanese Flush Cut Trim Hand Saw is priced competitively with other high-end hand saws. While it may be slightly more expensive than some budget options, it is a worthwhile investment for anyone who values precision, versatility, and comfort. Additionally, because the saw is made of high-quality materials and is built to last, it will save you money in the long run by not needing to be replaced as frequently as cheaper options. In conclusion, the Suizan Japanese Flush Cut Trim Hand Saw is an exceptional tool that is highly recommended for anyone who works with wood. Its precision, versatility, and comfort make it an ideal choice for a wide range of cutting tasks, and its flush cut design ensures that you can make precise cuts without damaging your workpiece. While it may not be suitable for larger cutting tasks, it is a worthwhile investment for anyone who values precision and quality in their tools. Whether you are a professional woodworker or a DIY enthusiast, the Suizan Japanese Flush Cut Trim Hand Saw is a tool that is sure to impress. One of the standout features of the Suizan Japanese Flush Cut Trim Hand Saw is its durability. The saw is made of high-quality materials, and its blade is heat-treated to ensure that it is resistant to wear and tear. Additionally, the saw’s teeth are designed to be self-cleaning, which means that they are less likely to become clogged with sawdust or other debris. This ensures that the saw will last for years, even with heavy use. Another benefit of the Suizan Japanese Flush Cut Trim Hand Saw is its ease of use. The saw’s handle is ergonomically designed to fit comfortably in your hand, which makes it easy to use for extended periods without experiencing fatigue or discomfort. Additionally, the saw’s blade is thin and flexible, which allows for greater control and maneuverability. This is particularly useful when making delicate cuts or working in tight spaces. The flush cut design of the Suizan Japanese Flush Cut Trim Hand Saw is another standout feature. This design allows the saw to cut very close to the surface without damaging it, which makes it ideal for trimming and finishing work. Additionally, the flush cut design allows for more versatility in the types of cuts that can be made. This makes the saw a versatile tool that can be used for a wide range of woodworking projects. When it comes to drawbacks, there are very few to speak of. The only potential downside of the Suizan Japanese Flush Cut Trim Hand Saw is its short blade length, which may not be suitable for larger cutting tasks. However, for the tasks it is designed for, the saw is hard to beat. In terms of price, the Suizan Japanese Flush Cut Trim Hand Saw is priced competitively with other high-end hand saws.